The FMC-8000/LFU is a non-invasive graphic chart flowmeter by ultrasonic transit time specific for full load liquid pipes.
This flowmeter type measures the fluid velocity by the transit timecalculation between two separate ultrasonic transducers whichoperate both as transmitters and receivers.
The difference in the measured transit time is directly and exactly proportional to the velocity of fluid in the pipe.

It incorporates a 5" TFT touch screen Graphical Display with datalogging capabilities, Ethernet and Serial Communications (Modbus).

Features

Standard

• Graphic chart recorder and flow datalogger by means a 5” color TFT touch screen on the flow processor
• Configurable by easy multilingual menu via touch screen
• For pipes from DN30 to DN3000 according to transducers (see model selection)
• Flow calculation by selection of parameters and fluid conduit
• Shows the Flow (m3/h), Totalizer (m3), Elapsed time (h), Max. or Min. Flow, Average Flow, etc..
• Selectable as Metric or Saxon units (Gal, etc.)
• ETHERNET (Modbus over TCP. http etc..) and USB port by front panel
• Serial communication Modbus RTU
• Accuracy: Better than 1% to 3% depending on installation conditions
• Speed Range: 0.03 to 20 m/sec
• Temperature: -30 to +90 Deg C 
• Protection: IP65 converter and IP67 sensors
• Outputs: 1x4-20 mA + 1 pulse output + 2 x Relay Outputs
• 85 ... 265 Vac power (24 Vdc optional)

Optional

• Power Supply 12 or 24 Vac/dc